User Interface
Date and Time Tab
Use the Date and time tab to configure the server to use an external NTP server and to configure a time zone.
Date and time tab
|
Component |
Description |
|
Use external NTP server |
Click Enable to use an external NTP server. |
|
Authenticate network time synchronization |
Select True to define the primary and secondary NTP server addresses. |
|
Primary time server |
Type the address to the primary time server to which the shadow automation server date and time object synchronizes its clock. |
|
Primary time server Key Id |
Type the ID of the authentication key for the primary time server. |
|
Primary time server Key |
Type the authentication key for the primary time server. |
|
Confirm password |
Confirm password. |
|
Secondary time server |
Type the address to the secondary time server to which the shadow automation servers' date and time object synchronizes its clock. |
|
Secondary time server Key Id |
Type the ID of the authentication key for the secondary time server. |
|
Secondary time server Key |
Type the authentication key for the secondary time server. |
|
Confirm password |
Confirm password. |
|
Use custom time zone |
Select Enabled to configure and use a custom time zone. |
|
Description |
Type a description for the time zone. |
|
UTC Offset |
Enter the UTC offset. |
|
Daylight saving time |
Select Enable to use daylight saving time. |
|
DST Delta (Minutes) |
Enter the daylight saving time delta. |
|
DST Start Month |
Enter the month you want the daylight saving time to start. |
|
DST End Month |
Enter the month you want the daylight saving time to end. |
|
DST Start Week |
Enter the week you want the daylight saving time to start. |
|
DST End Week |
Enter the week you want the daylight saving time to end. |
|
DST Start Day |
Enter the day and time you want the daylight saving time to start. |
|
DST End Day |
Enter the day and time you want the daylight saving time to end. |
Regional Settings